Gravel, soil and aggregate delivery in Bastrop, TX
Bulk gravel, road base, decomposed granite, sand, topsoil, mulch and stone delivered in Bastrop and across Bastrop County. Topsoil and fill dirt delivery plus current aggregate prices per ton, no trip to the landscape yard. Request a quote to confirm the material, truck access and delivery schedule.
Local Bastrop County orders commonly include road base and crushed concrete for long drives, plus topsoil and mulch for sandy sites. Covered Bastrop ZIP codes are approximately 33 miles from dispatch pricing origin.
Delivery location
Choose your location
Bastrop · 78602
- Small truck / load
- $209.00
- Big truck / load
- $239.00
Estimated haul fees only. Materials and sales tax are separate. Exact address, truck access and scheduling are confirmed by dispatch.
Bastrop, Texas
Map available on the website preview and published website.
Map shows the town or selected ZIP, not an exact delivery boundary, yard or unloading location. Eligibility is determined by the covered ZIP list.
Delivery to Bastrop
from $209.00 /load
Delivery schedule
Confirmed by dispatch
ZIP codes served
1
Questions about access, tonnage or timing in Bastrop? Call our dispatch line at (737) 259-5494, Monday to Saturday.
Bastrop material planning
Choosing materials for your Bastrop project
A Bastrop delivery quote should account for both the material and the approach to the property. For longer driveway projects or multiple stockpiles, confirm quantities and unloading access before arranging loads. Use the local ZIP estimates as a starting point, then request an address-specific quote for your chosen grades.
Driveways and rural access
Compare road base, crushed limestone base and recycled base for your contractor's planned driveway section. Asphalt millings are a separate recycled surface option, not a promise of finished asphalt pavement. The right grade and depth depend on drainage, existing ground and traffic.
Soil, mulch and decorative stone
For Bastrop lawn preparation and planting beds, compare screened soil and loam rather than using structural fill as planting soil. Mulch and decorative rock offer different surface finishes. Review particle size and the intended use of each grade before combining a landscape order.
Plan the Bastrop drop
Describe the full route from the road to the unloading area, including narrow gates, bridges, soft sections and turning space. Mark separate drop locations for aggregate and soil. Dispatch reviews truck access and confirms the schedule for multi-load deliveries rather than assuming every load can reach the same spot.
Material size, fines content and source-specific testing matter. Confirm structural fill, slab-adjacent grading, drainage and erosion-control requirements with your contractor or engineer; delivery is not installation or a certification of suitability.
Local soil and drainage advice for Bastrop
Sandy uplands, clay pockets and river soils
Bastrop-area sites can include sandy Lost Pines uplands, clay-rich ground and alluvial soils near the Colorado River. Texture, drainage and bearing conditions vary by property. Do not assume every Bastrop lot is sandy or that apparently dry ground will support a loaded truck after rain.
Stabilize the driveway before the finish
For long rural drives, have soft spots, runoff, culverts, traffic and the planned base section reviewed. Compactable base and a decorative gravel surface serve different roles. Loose rock or asphalt millings alone do not guarantee stabilization, pavement performance or erosion control.
Match soil to the planting project
Sandy soil may drain rapidly, while clay-rich pockets may hold water. Compare screened soil, loam and planting blends after assessing the site and planned vegetation; texture and organic content vary by grade. Mulch is a surface layer for planted beds, not structural fill or a substitute for a drainage plan.
Choose by the job
Gravel vs road base for Bastrop projects
For Bastrop rural drives and multi-load access projects, compare limestone base, caliche and approved recycled concrete for the compacted section. Clean limestone, river rock and pea gravel belong in their specified drainage or landscape applications. Asphalt millings are a separate recycled option, not finished asphalt pavement.
Road base: a compacted foundation
Graded angular aggregate with fines is intended to bind into a compacted layer when it meets the project specification. Confirm moisture, lift thickness and compaction with the installer; a product name does not certify structural suitability.
Gravel: match the grade to the finish or drain
Clean angular stone, rounded gravel and decomposed granite behave differently. Choose the specified size and fines content for drainage, paths or landscape cover. Rounded decorative stone is not structural base, and stone alone does not solve drainage.
Bastrop road base options: current prices

Limestone Flex Base - Standard
From $26.00/ton
Compacted driveway foundation and access-road base when the grade meets the project design. Contains fines; not a replacement for clean drainage stone. Fines to nominal 1 1/2 in; confirm upper sieve.
3 ton minimum
View material →
Caliche Road Base
From $20.00/ton
Budget-conscious access roads and base layers where caliche is approved for the site. Performance varies by source and moisture; confirm grading and compaction. Fines to 2 in.
5 ton minimum
View material →
Recycled Crushed Concrete
From $22.00/ton
Recycled base option for approved driveways and jobsite access. Confirm gradation, debris concerns and project acceptance. Fines to 1½ in.
5 ton minimum
View material →Bastrop gravel and landscape stone: current prices

Crushed Limestone - Clean, 3/4 in
From $42.00/ton
Clean angular stone for designed drains and stone cover where this size is suitable. Clean stone does not compact like flex base; drainage needs a designed outlet. About ½–1 in (nominal ¾ in).
2 ton minimum
View material →
Crushed Limestone - 1 in
From $42.00/ton
Angular crushed limestone for approved aggregate and landscape applications. Confirm fines content and nominal grade for the intended surface. Nominal 1 in; confirm fines content.
2 ton minimum
View material →
Pea Gravel
From $50.00/ton
Contained garden paths and decorative cover with small rounded stone. Rounded particles move underfoot and tires; not structural road base. ⅜–⅝ in.
2 ton minimum
View material →
Texas River Rock
From $50.00/ton
Decorative beds and landscape borders with rounded river stone. Confirm current size and color; decorative cover alone does not solve drainage. Typically 1–3 in.
2 ton minimum
View material →
Decomposed Granite
From $42.00/ton
Paths and landscape surfaces where the decomposed-granite grade fits the design. Unstabilized granite may dust, track or wash out; not automatically accessible. Fines to ⅜ in (9.5 mm).
2 ton minimum
View material →Material prices and minimums come from the current catalog. Delivery and sales tax are separate; specialty grades remain by quote. Photos are illustrative, not proof of current stock or certified grading.
Project planning
Plan your Bastrop gravel project
Choose the right material
Compare materials for your Bastrop project

Limestone vs road base
Clean stone or compactable base? Choose by grading and application.
Compare materials
Caliche driveways
Rural access, drainage, compaction and delivered-cost planning.
Compare materials
Topsoil vs sandy loam
Compare planting soil for lawn prep, leveling and garden beds.
Compare materials
Asphalt millings
Recycled grades, installation considerations and surface expectations.
Compare materialsDelivery rates in Bastrop
Estimated per-load haul fees by covered ZIP. Materials and sales tax are separate; the final quote depends on your exact address, material and truck requirements.
| ZIP | Small truck | Big truck |
|---|---|---|
| 78602 | $209.00 | $239.00 |
Bastrop aggregate and soil prices per ton
Compare intended uses and grade details for every active material below. Open a material's uses for application and delivery notes, or follow its name or photo to the full specifications.
| Material | Per ton | Minimum |
|---|---|---|
Uses & grade detailsIntended uses: Driveways, road subbase, pads, compacted surfaces Driveways; road subbase; pads; compacted surfaces. Size & grading: Fines to nominal 1 1/2 in; confirm upper sieve. Standard crushed limestone base with fines. Placement: Follow the approved project moisture, lift thickness and installation specification Delivery: Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade. Manufacturer webpage may label upper sieve 1 3/4 in; use written SKU specification. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Limestone Flex Base - Standard specifications | $26.00 | 3 t |
Uses & grade detailsIntended uses: Ranch roads, Site access, Erosion control Caliche is a natural Central Texas road base that packs hard when wet and rolled. It is a budget-friendly choice for ranch roads, rural driveways, parking pads and building pads, delivered across Austin, Round Rock, Georgetown, Pflugerville, Leander, Cedar Park, Taylor and nearby towns. Size & grading: Fines to 2 in. Natural caliche with mixed aggregate. Placement: Excellent when moisture-conditioned Delivery: Best placed on a stable subgrade with room for a full dump. Full Caliche Road Base specifications | $20.00 | 5 t |
Uses & grade detailsIntended uses: Driveways, Laydown yards, Temporary roads Size & grading: Fines to 1½ in. Recycled concrete base with angular pieces. Placement: Excellent; place in lifts and compact Delivery: Recycled material can vary in color and may contain trace masonry. This is typical 1½ in-minus recycled base, not a confirmed 2 in TXDOT 247/COA product. One-inch gravel, 3 to 5 in concrete and ⅜ in concrete fines are separate grades; request current testing for specified work. Full Recycled Crushed Concrete specifications | $22.00 | 5 t |
Uses & grade detailsIntended uses: Driveways, Ranch and county roads, Parking pads, Equipment yards, Low dust surfaces Size & grading: Fines to about 1 in. Ground recycled asphalt pavement (RAP). Placement: High; roll in 3 to 4 in lifts, binds tighter in summer heat Delivery: Spread 3 to 4 in deep on a firm subgrade and compact. General asphalt millings are not interchangeable with specified ½ in crushed asphalt, 2 to 3 in crushed asphalt or asphalt sand. Confirm the required grade before ordering. Full Asphalt Millings specifications | $32.00 | 2 t |
Uses & grade detailsIntended uses: Municipal road base, approved roadway subbase Municipal road base; approved roadway subbase. Size & grading: Supplier City Base specification nominal 1 1/2 in. Supplier City Base specification nominal 1 1/2 in. Placement: Follow the approved project moisture, lift thickness and installation specification Delivery: Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade. Municipal approval must be verified per project. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Limestone Base - City Grade specifications | By quote | Confirm |
Uses & grade detailsIntended uses: Thick road subbase, heavy access roads Thick road subbase; heavy access roads. Size & grading: Coarse compactable crushed limestone base up to nominal 3 in. Coarse compactable crushed limestone base up to nominal 3 in. Placement: Follow the approved project moisture, lift thickness and installation specification Delivery: Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade. Do not present as a 2 in base equivalent. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Limestone Base - 3 in specifications | By quote | Confirm |
Uses & grade detailsIntended uses: Building and slab pads, Structural backfill, Site pad construction A compactable grading fill, not a finished erosion-resistant surface. Confirm drainage beside an existing slab and protect exposed slopes from rain. Size & grading: Screened sand and clay blend, up to about 1½ in. Plasticity index about 7 to 20, no roots or debris. Placement: High; compacts to standard Proctor density in 6–8 in lifts Delivery: Needs direct dump access to the pad; condition moisture before rolling. Our Select Fill is a sand/clay soil blend, not crushed concrete fines or limestone select fill. Similar product names do not establish equivalent composition or foundation approval. Full Select Fill specifications | $22.00 | 5 t |
Uses & grade detailsIntended uses: Grading, Backfill, Pad building Size & grading: Mixed fines; occasional stones. Unscreened or lightly processed native fill. Placement: Variable; compact in controlled lifts Delivery: Not sold as topsoil; expect natural color and texture variation. Full Fill Dirt specifications | $14.00 | 5 t |
Uses & grade detailsIntended uses: General bulk fill, grading, approved trench backfill General bulk fill; grading; approved trench backfill. Size & grading: Limestone fill including fines, nominal 1 1/4 in. Limestone fill including fines, nominal 1 1/4 in. Placement: Follow the approved project moisture, lift thickness and installation specification Delivery: Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade. Not necessarily select fill; verify gradation. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Limestone Fill - 1 1/4 in specifications | By quote | Confirm |
Uses & grade detailsIntended uses: Concrete sand for approved mixes Concrete sand for approved mixes. Size & grading: ASTM concrete sand 4 mesh to 100 mesh. ASTM concrete sand 4 mesh to 100 mesh. Placement: Follow the approved project moisture, lift thickness and installation specification Delivery: Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade. Supplier-specific crushed limestone sand; not automatically natural washed sand. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Concrete Sand - ASTM, 4 to 100 Mesh specifications | By quote | Confirm |
Uses & grade detailsIntended uses: Mortar, Sandboxes, Arena footing Size & grading: No. 8 to No. 100, fine. Washed, screened fine mason sand. Placement: Low; used as a mix ingredient and bedding, not a base Delivery: Dump on pavement or a tarp to keep it clean for mortar work. Full Masonry Sand specifications | $40.00 | 2 t |
Uses & grade detailsIntended uses: Pipe and conduit bedding, Utility trench backfill, Under slab cushion Size & grading: Fine to medium, all passing ⅜ in. Washed screened bedding sand, low silt content. Placement: Moderate; settles firmly with water or light tamping Delivery: Dump on flat ground beside the trench line and cover if heavy rain is expected. Full Utility Bedding & Cushion Sand specifications | $30.00 | 3 t |
Uses & grade detailsIntended uses: Pool bases and pool backfill, Leveling under pavers and slabs, Trench and tank backfill, Raising low spots Size & grading: Fine to coarse sand, may include some silt. Unwashed natural fill sand. Placement: Good; dampen and compact in 4 to 6 in lifts Delivery: Dump close to the dig or pool shell; about 12 to 13 tons fills one truck by volume. Full Fill Sand specifications | $24.00 | 3 t |
Uses & grade detailsIntended uses: Concrete and hot mix sand, Utility bedding, Paver leveling, Masonry fill Approved construction mixes and bedding. Size & grading: Fine limestone particles; current sieve report required. Washed Manufactured Limestone Sand. Placement: Follow the approved project moisture, lift thickness and installation specification Delivery: Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade. Confirm current gradation and project suitability before ordering.. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Manufactured Limestone Sand - Washed specifications | $32.00 | 5 t |
Uses & grade detailsIntended uses: French drains, Retaining wall backfill, Septic and foundation drainage Size & grading: About ½–1 in (nominal ¾ in). Open-graded washed limestone, fines removed. Placement: Low; stays open so water can move through Delivery: Dumps clean and shovels easily; will not pack tight like base rock. Full Crushed Limestone - Clean, 3/4 in specifications | $42.00 | 2 t |
Uses & grade detailsIntended uses: Rural and heavy-traffic driveways, Drainage trenches and French drains, Sloped ground stabilization, Foundation perimeter drainage Size & grading: Nominal 1 in; confirm fines content. Crushed limestone; exact grading varies by source. Placement: Clean stone stays open; minus grades compact differently. Confirm which your project needs. Delivery: Confirm clean versus minus grading before scheduling; provide a firm clear dump area. One-inch clean stone and one-inch-minus base are not interchangeable. Confirm drainage or compaction suitability with the contractor. Full Crushed Limestone - 1 in specifications | $42.00 | 2 t |
Uses & grade detailsIntended uses: Walkways, Patios, Drainage Size & grading: ⅜–⅝ in. Washed, consistently small gravel. Placement: Low; remains movable underfoot Delivery: Use edging for finished areas; material rolls and spreads easily. Full Pea Gravel specifications | $50.00 | 2 t |
Uses & grade detailsIntended uses: Hot mix asphalt fines, Paver and flagstone bedding, Pathway topping, Pipe bedding fines Leveling and compacted bedding, subject to approval. Size & grading: Fine limestone particles; current sieve report required. Limestone Dry Screenings. Placement: Follow the approved project moisture, lift thickness and installation specification Delivery: Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade. Confirm current gradation and project suitability before ordering.. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Limestone Screenings - Dry specifications | $28.00 | 5 t |
Uses & grade detailsIntended uses: Utility trench bedding, concrete batches Utility trench bedding; concrete batches. Size & grading: Well-graded aggregate 1 1/4 in to 7 mesh. Well-graded aggregate 1 1/4 in to 7 mesh. Placement: Follow the approved project moisture, lift thickness and installation specification Delivery: Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade. Check approval under specified pipe standard. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Well-Graded Limestone - 1 1/4 in to #7 specifications | $34.00 | 5 t |
Uses & grade detailsIntended uses: Concrete production, general engineered aggregate Concrete production; general engineered aggregate. Size & grading: Coarse C33 limestone 1 1/4 to 3/8 in. Coarse C33 limestone 1 1/4 to 3/8 in. Placement: Follow the approved project moisture, lift thickness and installation specification Delivery: Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade. Check contract approved grading and concrete design. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Concrete Aggregate - ASTM C33 Limestone, 1 1/4 to 3/8 in specifications | $38.00 | 5 t |
Uses & grade detailsIntended uses: Construction entrances, French drains, Culvert outlets, Erosion control Drainage and erosion protection, subject to project approval. Size & grading: Nominal 1 to 3 in. Hard Stone 1 × 3 in. Placement: Follow the approved project moisture, lift thickness and installation specification Delivery: Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade. Confirm current gradation and project suitability before ordering.. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Limestone Hard Stone - 1 x 3 in specifications | $42.00 | 5 t |
Uses & grade detailsIntended uses: Rock check dams, channel armor, erosion control Rock check dams; channel armor; erosion control. Size & grading: Nominal angular hard limestone 3 x 5 in. Nominal angular hard limestone 3 x 5 in. Placement: Follow the approved project moisture, lift thickness and installation specification Delivery: Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade. Not interchangeable with 3 x 5 recycled concrete. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Limestone Hard Stone - 3 x 5 in specifications | By quote | Confirm |
Uses & grade detailsIntended uses: Specified large riprap, landscape boulders Specified large riprap; landscape boulders. Size & grading: 18 in nominal size-selected/racked boulders. 18 in nominal size-selected/racked boulders. Placement: Place with suitable equipment; not compacted like road base Delivery: Confirm individual weights, unloading equipment, access and hauling before scheduling. Confirm actual racked acceptance band. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Limestone Boulders - Racked, 18 in specifications | By quote | 5 t |
Uses & grade detailsIntended uses: Large engineered riprap, channel stabilization Large engineered riprap; channel stabilization. Size & grading: Nominal 24 in size-selected/racked boulders. Nominal 24 in size-selected/racked boulders. Placement: Place with suitable equipment; not compacted like road base Delivery: Confirm individual weights, unloading equipment, access and hauling before scheduling. Confirm engineered riprap grading. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Limestone Boulders - Racked, 24 in specifications | By quote | Confirm |
Uses & grade detailsIntended uses: Lawns, Garden beds, Grading Size & grading: Screened to about ½ in. Screened natural soil; small organics possible. Placement: Low; allow for settling after placement Delivery: Moisture changes load weight and workable volume. Full Screened Topsoil specifications | $40.00 | 3 t |
Uses & grade detailsIntended uses: New lawns and sod prep, Leveling low spots, Planting beds, Topdressing Size & grading: Screened to about ¼ in, sand and silt blend. Screened sandy loam, low clay. Placement: Moderate; firms up but stays workable for roots Delivery: Keep dry before spreading; wet loam is heavy and harder to drag. Full Sandy Loam specifications | $36.00 | 2 t |
Uses & grade detailsIntended uses: Flower and vegetable beds, Lawn top dressing, Planting backfill Size & grading: Screened to about 1/2 in minus. Dark loam with natural organics, no rock or roots. Placement: Low; stays loose for roots Delivery: Dump close to the beds; cover the pile if rain is expected. Full Chocolate Loam - Screened specifications | $43.00 | 2 t |
Uses & grade detailsIntended uses: Clay soil amendment, Raised bed enrichment, Lawn top dressing Size & grading: Screened to about ⅜ in. Aged aerobic compost, weed seed free. Placement: Do not compact; till in or spread as a thin top dress Delivery: Light for its weight, so a load takes more dump space than aggregate. Full Organic Compost - Screened specifications | $75.00 | 2 t |
Uses & grade detailsIntended uses: Garden paths, Patios, Xeriscape Size & grading: Fines to ⅜ in (9.5 mm). Typical sieve analysis: ⅜ in 100% passing · No. 4 90–100% · No. 10 70–90% · No. 40 35–55% · No. 200 10–20% fines. Placement: High; compact in 2 to 3 in lifts at optimum moisture to 95% standard Proctor. Typical CBR 60+ compacted. Delivery: Protect nearby finished surfaces from dust during dumping. Gradation and strength values above are typical for Central Texas decomposed granite; request a current sieve analysis and Proctor report for your project spec. Full Decomposed Granite specifications | $42.00 | 2 t |
Uses & grade detailsIntended uses: Dry creek beds, Drainage, Borders Size & grading: Typically 1–3 in. Washed, rounded mixed-size stone. Placement: Low; use containment or edging Delivery: Rounded rock flows during dumping and needs a contained drop area. Full Texas River Rock specifications | $50.00 | 2 t |
Uses & grade detailsIntended uses: General landscape ground cover, erosion cover General landscape ground cover; erosion. Size & grading: Quarry-sheet mulch one/two grind. Quarry-sheet mulch one/two grind. Placement: Confirm application rate and spreading method; not structural fill Delivery: Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade. Confirm price UNIT; wood species/color and density unknown. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance. Full Bulk Mulch - Single or Double Grind specifications | By quote | Confirm |
Uses & grade detailsIntended uses: Landscape beds, Tree rings, Slopes and erosion control Size & grading: Shredded fibers, 1 to 4 in strands. Natural shredded Texas cedar, no dye. Placement: Knits together and stays put on slopes Delivery: Bulky and light: about 9 tons fills one truck. Full Cedar Mulch specifications | $80.00 | 2 t |
Uses & grade detailsIntended uses: Retaining walls, Terraced beds, Ranch landscaping, Seating walls Size & grading: About 2 × 2 × 4 ft per block (2 × 2 × 5 ft on request). Quarry-cut Austin cream limestone, natural or sawn face. Placement: Set on 6 in of compacted crushed limestone base with drainage rock behind Delivery: About 1 ton per block. You need a skid steer or excavator on site to set blocks. Walls over 4 ft need an engineered design. Full Limestone Wall Blocks specifications | By quote | 4 t |
Uses & grade detailsIntended uses: Storage bins, Barriers, Engineered walls, Yard dividers Size & grading: About 2 × 2 × 4 ft per block, interlocking top knobs. Precast concrete bin block. Placement: Set on a level, compacted base; follow the engineered layout for walls Delivery: About 1.8 tons per block. Unloading needs a forklift, skid steer or excavator. Freight is quoted by truckload. Full Interlocking Concrete Blocks specifications | By quote | 9 t |
Uses & grade detailsIntended uses: Garden walls, Raised beds, Residential retaining walls, Steps and borders Size & grading: Units about 60 to 80 lb each, with matching caps. Manufactured concrete wall units, one compatible system. Placement: First course on compacted base; clean drainage rock behind each course Delivery: Delivered on pallets of about 1.5 to 2 tons. Leave a firm, level drop spot the truck can reach. Full Segmental Retaining Wall Blocks specifications | By quote | 2 t |
Material prices exclude delivery and sales tax. Specialty grades remain by quote; availability and delivery timing are confirmed by dispatch.
How many tons do you need in Bastrop?
Enter your area and depth to see tons, truckloads and the material cost before delivery.
Tonnage calculator
Enter your area and depth to see how many tons you need. Pick a material to use its real planning density. Confirm moisture and compaction needs for your site.
Auto-filled from Limestone Flex Base - Standard (1.55 t/yd³ · 3,100 lb/yd³). Override only if you know your source density.
Enter a length, width, and depth to calculate how many tons you need.
Planning estimate only. Actual tonnage varies with moisture, compaction and source. Material minimums apply; freight and sales tax are separate. Beyond 40 miles, delivery needs a confirmed address-specific quote. Dispatch confirms truck access and the requested date.
How bulk material delivery works in Bastrop
1. Match the grade and quantity
Choose the material for its intended use. Provide tonnage, or the project's length, width and planned depth. Calculator results are estimates; confirm compacted depth and any required testing with your installer.
2. Confirm the delivered price
Send the full Bastrop delivery address and ZIP. Material pricing, minimums, haul charges and applicable sales tax are separate parts of the quote. Quote-only grades require confirmed pricing rather than a zero-dollar order.
3. Prepare a safe drop location
Describe gate width, overhead clearance, turning space, slopes and soft ground. Provide a firm, accessible unloading spot and note whether multiple materials need separate stockpiles. Blocks and oversized stone may need unloading equipment confirmed in advance.
4. Confirm payment and dispatch
Follow the order or quote payment instructions. After payment confirmation, dispatch manually assigns the truck and confirms the delivery date. Coordinate multiple loads with the crew; spreading, grading and compaction must be arranged separately.
Delivery services in Bastrop
Planning a project in Bastrop? See our decomposed granite delivery page for paths and patios, browse the plant & paver guides for Central Texas growing and hardscape advice, or contact dispatch for help with access, tonnage and scheduling.
ZIP codes we deliver to in Bastrop
- 78602 · 33 mi
More Central Texas delivery areas
Nearby delivery areas
Bastrop gravel, road base & soil questions
- How much does delivery cost in Bastrop?
- Delivery starts at $209.00 per truckload. Materials are priced per ton on top of that.
- How fast can you deliver?
- Request your preferred delivery day with the order or quote. Dispatch confirms availability, truck access and the delivery window; payment does not automatically assign a truck or date.
- Can I order a large quantity?
- Yes. Big orders are split across trucks automatically, and contractors can request volume pricing.
- Is this a landscape supply yard in Bastrop?
- We deliver landscape supply materials straight to your site in Bastrop, with online pricing and scheduled delivery windows.
- What gravel do you deliver in Bastrop?
- Pea gravel, crushed granite, crushed limestone base, road base, river rock and crushed concrete are available by the ton for Bastrop delivery.
- What road base should I use for a long Bastrop driveway?
- Compare limestone base, approved caliche and recycled concrete against traffic, subgrade, drainage and the planned compacted thickness. Ask your installer to confirm the grade and any debris restrictions. Calculate each layer separately; decorative gravel is not a substitute for the designed base.
- Are asphalt millings suitable for a Bastrop rural drive?
- They may suit projects that allow this recycled material, but grading, binder content and performance vary. Confirm source-specific details and installation requirements. Millings are not a guarantee of sealed pavement and do not remove the need for prepared ground, compaction and drainage.
- Should I use sandy loam on an already sandy Bastrop lot?
- Not automatically. Assess the existing texture, moisture behavior and planting needs before choosing a soil. Compare current screened topsoil, loam and blend specifications, and confirm the required depth. A sandy-loam label alone does not guarantee the right root-zone mix.
- Can a delivery truck cross my Bastrop bridge or soft driveway?
- Do not assume it can. Tell dispatch about bridges, culverts, narrow gates, soft sections, overhead hazards and turning space along the full approach. Any required load-capacity assessment must be confirmed before dispatch; identify a safe alternative unloading spot if access is uncertain.























