AI material illustrationAsphalt Millings
$32.00 / ton
Ground recycled asphalt pavement (RAP) milled from old roads. It spreads like road base, and once compacted and warmed by the sun the leftover binder knits it into a firm, dark, low-dust surface. A budget friendly choice for long driveways, ranch roads, equipment yards and parking areas. General millings are not interchangeable with specified ½ in crushed asphalt, 2 to 3 in crushed asphalt or asphalt sand; confirm the required grade before ordering.
2 tons × $32.00 per ton. Delivery and applicable tax are separate.
1 dump-truck load
Up to 16 tons per load. Different materials ship in separate loads.
Material specifications
- Particle size
- Fines to about 1 in
- Bulk density
- 1.40 tons/yd³ (estimate) (2,800 lb/yd³)
- Gradation
- Ground recycled asphalt pavement (RAP)
- Compaction
- High; roll in 3 to 4 in lifts, binds tighter in summer heat
- Finished character
- Dark, firm, low dust surface
- Specs & test reports
- General asphalt millings are not interchangeable with specified ½ in crushed asphalt, 2 to 3 in crushed asphalt or asphalt sand. Confirm the required grade before ordering.
Typical nominal specifications. Natural materials vary by source, moisture, and production run; confirm critical engineering requirements before ordering.
Typical applications
- Driveways
- Ranch and county roads
- Parking pads
- Equipment yards
- Low dust surfaces
AI material illustrationCoverage calculator
Enter your area and depth and we'll estimate the tonnage.
Estimate includes no waste factor. Density changes with moisture and compaction; ordering 5–10% extra is common for field variation.
Delivery specifications
- Truck capacity
- Up to 16 tons per load
- Order minimum
- 2 tons
- Recommended access
- 12 ft wide, firm and level
- Overhead clearance
- 14 ft on approach; more at dump point
- Material handling
- Spread 3 to 4 in deep on a firm subgrade and compact.
Keep the dump area clear of people, vehicles, soft ground, septic systems, and overhead utilities. The driver makes the final safe-placement decision on arrival.
Know your material
Build a stable foundation
A practical guide to choosing and planning asphalt millings. Match the exact grade to your project; nominal sizes and natural colors can vary between yards.
Size & grading
Fines to about 1 in
Surface character
Dark, firm, low dust surface
Estimated loose coverage
About 77 sq ft / ton at 3 in
Before compaction, settling or waste.
Where it works
Compacted driveways, access roads and structural subbase when the selected grade matches your plans.
When to choose something else
Base with fines is not clean drainage stone. Do not use it as a free-draining trench or decorative finish without checking the design.
Before it arrives
Remove organic matter and soft spots, establish drainage and prepare a firm subgrade. Ask your contractor whether separation fabric is needed.
Placement & installation
Place in controlled lifts and compact at suitable moisture. Lift thickness, compaction effort and finished depth depend on the material and project specification.
Care over time
Keep drainage paths open. Regrade ruts and replenish worn areas; address subgrade or drainage problems before adding another layer.
Confirm with the source
Exact size and fines content, source test reports where specified, compacted depth and equipment access.
General planning guidance. Supplier specifications, project plans and site conditions determine suitability and installation requirements.
Asphalt Millings delivery questions
- What is the minimum Asphalt Millings order?
- The minimum is 2 tons. Larger quantities are split into truckloads automatically.
- How much area does Asphalt Millings cover?
- Coverage depends on depth. The estimated bulk density is 1.40 tons per cubic yard; confirm source-specific density for critical work.
- Can Asphalt Millings be delivered in Central Texas?
- Enter your ZIP to check the delivery area and delivery charge. Source availability and safe placement must be confirmed for your order.
2 t · Asphalt Millings
$64.00