AI material illustration$22.00 / ton
Engineered select fill, a screened sand and clay blend held to a plasticity index of roughly 7 to 20 with no roots, trash or high shrink clay. It compacts to standard Proctor density in lifts, which is what pad and slab specifications call for. Ordinary fill dirt is not a substitute. This sand/clay soil blend is not recycled concrete fines or limestone select fill; similar names do not establish equivalent composition or foundation approval.
A compactable grading fill, not a finished erosion-resistant surface. Confirm drainage beside an existing slab and protect exposed slopes from rain.
General material guidance, not a site-specific grading design or certification. Need source-specific soil data? Request specs before ordering.
5 tons × $22.00 per ton. Delivery and applicable tax are separate.
1 dump-truck load
Up to 16 tons per load. Different materials ship in separate loads.
Typical nominal specifications. Natural materials vary by source, moisture, and production run; confirm critical engineering requirements before ordering.
AI material illustrationEnter your area and depth and we'll estimate the tonnage.
Estimate includes no waste factor. Density changes with moisture and compaction; ordering 5–10% extra is common for field variation.
Keep the dump area clear of people, vehicles, soft ground, septic systems, and overhead utilities. The driver makes the final safe-placement decision on arrival.
Know your material
A practical guide to choosing and planning select fill. Match the exact grade to your project; nominal sizes and natural colors can vary between yards.
Size & grading
Screened sand and clay blend, up to about 1½ in
Surface character
Dense, low movement structural fill
Estimated loose coverage
About 83 sq ft / ton at 3 in
Before compaction, settling or waste.
Grading, lawn preparation or planting only as appropriate to the selected fill, loam, topsoil or blend.
Fill soil is not planting soil. Screened topsoil is not a guaranteed garden blend, and added compost is not a substitute for drainage or a soil test.
Assess drainage and existing soil first. Remove construction debris and persistent weeds; obtain a soil test when plant health or fertility matters.
Keep structural fill and planting layers separate. Avoid working saturated soil and compacting future root zones; establish a finished grade away from structures.
Water and amend for the intended planting and local conditions. Allow for settling and prevent erosion until vegetation is established.
Screen size, organic content, source history, weed or contamination concerns and any required geotechnical or horticultural tests.
General planning guidance. Supplier specifications, project plans and site conditions determine suitability and installation requirements.
5 t · Select Fill
$110.00