AI material illustrationManufactured Limestone Sand - Washed
$32.00 / ton
Washed manufactured sand crushed from limestone. A consistent, angular sand for concrete and asphalt mixes, utility bedding and leveling.
Recommended uses & grade selection
Approved construction mixes and bedding.
- What should I confirm before ordering?
- Confirm current gradation and project suitability before ordering.. Confirm exact grading, availability and project acceptance with dispatch.
- Can this replace another similar material?
- Not automatically. Size, fines content, composition and handling differ between grades. Match your plans and ask for current specifications before substituting.
General material guidance, not a site-specific grading design or certification. Need source-specific soil data? Request specs before ordering.
5 tons × $32.00 per ton. Delivery and applicable tax are separate.
1 dump-truck load
Up to 16 tons per load. Different materials ship in separate loads.
Material specifications
- Particle size
- Fine limestone particles; current sieve report required
- Bulk density
- 1.35 tons/yd³ (estimate) (2,700 lb/yd³)
- Gradation
- Washed Manufactured Limestone Sand
- Compaction
- Follow the approved project moisture, lift thickness and installation specification
- Finished character
- Angular, clean, gray
- Specs & test reports
- Confirm current gradation and project suitability before ordering.. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance.
Typical nominal specifications. Natural materials vary by source, moisture, and production run; confirm critical engineering requirements before ordering.
Typical applications
- Concrete and hot mix sand
- Utility bedding
- Paver leveling
- Masonry fill
AI material illustrationCoverage calculator
Enter your area and depth and we'll estimate the tonnage.
Estimate includes no waste factor. Density changes with moisture and compaction; ordering 5–10% extra is common for field variation.
Delivery specifications
- Truck capacity
- Up to 16 tons per load
- Order minimum
- 5 tons
- Recommended access
- 12 ft wide, firm and level
- Overhead clearance
- 14 ft on approach; more at dump point
- Material handling
- Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade.
Keep the dump area clear of people, vehicles, soft ground, septic systems, and overhead utilities. The driver makes the final safe-placement decision on arrival.
Know your material
Match the sand to the job
A practical guide to choosing and planning manufactured limestone sand - washed. Match the exact grade to your project; nominal sizes and natural colors can vary between yards.
Size & grading
Fine limestone particles; current sieve report required
Surface character
Angular, clean, gray
Estimated loose coverage
About 80 sq ft / ton at 3 in
Before compaction, settling or waste.
Where it works
Applications to discuss with your installer: Approved construction mixes and bedding. Confirm source specifications and project approval before use.
When to choose something else
Fine masonry sand, utility sand and washed concrete sand are different products. Do not assume suitability for play areas, pools, septic systems or engineered mixes.
Before it arrives
Set finished elevations and contain the installation area. Confirm the required base and bedding system with your installer.
Placement & installation
Screed or mix according to the project specification. Moisture changes handling and bulk volume; use source grading data for engineered work.
Care over time
Keep stored sand covered and separated from soil or debris. Replenish exposed bedding only after correcting washout and drainage issues.
Confirm with the source
Confirm current gradation and project suitability before ordering.. Washed versus unwashed, particle-size distribution, application approval and any required testing.
General planning guidance. Supplier specifications, project plans and site conditions determine suitability and installation requirements.
Manufactured Limestone Sand - Washed delivery questions
- What should I confirm before ordering?
- Confirm current gradation and project suitability before ordering.. Confirm exact grading, availability and project acceptance with dispatch.
- Can this replace another similar material?
- Not automatically. Size, fines content, composition and handling differ between grades. Match your plans and ask for current specifications before substituting.
- What is the minimum Manufactured Limestone Sand - Washed order?
- The minimum is 5 tons. Larger quantities are split into truckloads automatically.
- How much area does Manufactured Limestone Sand - Washed cover?
- Coverage depends on depth. The estimated bulk density is 1.35 tons per cubic yard; confirm source-specific density for critical work.
- Can Manufactured Limestone Sand - Washed be delivered in Central Texas?
- Enter your ZIP to check the delivery area and delivery charge. Source availability and safe placement must be confirmed for your order.
5 t · Manufactured Limestone Sand - Washed
$160.00