AI material illustrationConcrete Aggregate - ASTM C33 Limestone, 1 1/4 to 3/8 in
$38.00 / ton
Coarse C33 limestone 1 1/4 to 3/8 in. Typical uses: Concrete production; general engineered aggregate. Check current approved grading and concrete design.
Recommended uses & grade selection
Concrete production; general engineered aggregate.
- What should I confirm before ordering?
- Check contract approved grading and concrete design. Confirm exact grading, availability and project acceptance with dispatch.
- Can this replace another similar material?
- Not automatically. Size, fines content, composition and handling differ between grades. Match your plans and ask for current specifications before substituting.
General material guidance, not a site-specific grading design or certification. Need source-specific soil data? Request specs before ordering.
5 tons × $38.00 per ton. Delivery and applicable tax are separate.
1 dump-truck load
Up to 16 tons per load. Different materials ship in separate loads.
Material specifications
- Particle size
- Coarse C33 limestone 1 1/4 to 3/8 in
- Bulk density
- 1.40 tons/yd³ (estimate) (2,800 lb/yd³)
- Gradation
- Coarse C33 limestone 1 1/4 to 3/8 in
- Compaction
- Follow the approved project moisture, lift thickness and installation specification
- Finished character
- Clean, angular stone
- Specs & test reports
- Check contract approved grading and concrete design. Nominal catalog grade only. Request current source-specific test reports; a product name does not certify project compliance.
Typical nominal specifications. Natural materials vary by source, moisture, and production run; confirm critical engineering requirements before ordering.
Typical applications
- Concrete production
- general engineered aggregate
AI material illustrationCoverage calculator
Enter your area and depth and we'll estimate the tonnage.
Estimate includes no waste factor. Density changes with moisture and compaction; ordering 5–10% extra is common for field variation.
Delivery specifications
- Truck capacity
- Up to 16 tons per load
- Order minimum
- 5 tons
- Recommended access
- 12 ft wide, firm and level
- Overhead clearance
- 14 ft on approach; more at dump point
- Material handling
- Keep the load separate and provide firm, clear delivery access; confirm availability and exact grade.
Keep the dump area clear of people, vehicles, soft ground, septic systems, and overhead utilities. The driver makes the final safe-placement decision on arrival.
Know your material
Choose the right stone, not just the color
A practical guide to choosing and planning concrete aggregate - astm c33 limestone, 1 1/4 to 3/8 in. Match the exact grade to your project; nominal sizes and natural colors can vary between yards.
Size & grading
Coarse C33 limestone 1 1/4 to 3/8 in
Surface character
Clean, angular stone
Estimated loose coverage
About 77 sq ft / ton at 3 in
Before compaction, settling or waste.
Where it works
Applications to discuss with your installer: Concrete production, general engineered aggregate. Confirm source specifications and project approval before use.
When to choose something else
Rounded stone moves under wheels and feet; angular stone behaves differently. Neither is automatically a substitute for compactable road base.
Before it arrives
Plan edging and drainage, remove weeds and prepare the base. Choose separation fabric for the site rather than assuming every installation needs it.
Placement & installation
Spread to the depth your project requires. Ask for a current sample to judge particle size, walking comfort and color before ordering a large quantity.
Care over time
Rake displaced stone back into place, remove debris and weeds, and top up thin areas. Surface dust can change the apparent color until rinsed by rain.
Confirm with the source
Check contract approved grading and concrete design. Clean versus minus grade, nominal size range, angular versus rounded shape and current source appearance.
General planning guidance. Supplier specifications, project plans and site conditions determine suitability and installation requirements.
Concrete Aggregate - ASTM C33 Limestone, 1 1/4 to 3/8 in delivery questions
- What should I confirm before ordering?
- Check contract approved grading and concrete design. Confirm exact grading, availability and project acceptance with dispatch.
- Can this replace another similar material?
- Not automatically. Size, fines content, composition and handling differ between grades. Match your plans and ask for current specifications before substituting.
- What is the minimum Concrete Aggregate - ASTM C33 Limestone, 1 1/4 to 3/8 in order?
- The minimum is 5 tons. Larger quantities are split into truckloads automatically.
- How much area does Concrete Aggregate - ASTM C33 Limestone, 1 1/4 to 3/8 in cover?
- Coverage depends on depth. The estimated bulk density is 1.40 tons per cubic yard; confirm source-specific density for critical work.
- Can Concrete Aggregate - ASTM C33 Limestone, 1 1/4 to 3/8 in be delivered in Central Texas?
- Enter your ZIP to check the delivery area and delivery charge. Source availability and safe placement must be confirmed for your order.
5 t · Concrete Aggregate - ASTM C33 Limestone, 1 1/4 to 3/8 in
$190.00