AI material illustration$26.00 / ton
Standard crushed limestone base with fines. Typical uses: Driveways; road subbase; pads; compacted surfaces. Confirm written gradation; nominal upper sieve may vary.
Driveways; road subbase; pads; compacted surfaces.
General material guidance, not a site-specific grading design or certification. Need source-specific soil data? Request specs before ordering.
3 tons × $26.00 per ton. Delivery and applicable tax are separate.
1 dump-truck load
Up to 16 tons per load. Different materials ship in separate loads.
Typical nominal specifications. Natural materials vary by source, moisture, and production run; confirm critical engineering requirements before ordering.
AI material illustrationEnter your area and depth and we'll estimate the tonnage.
Estimate includes no waste factor. Density changes with moisture and compaction; ordering 5–10% extra is common for field variation.
Keep the dump area clear of people, vehicles, soft ground, septic systems, and overhead utilities. The driver makes the final safe-placement decision on arrival.
Know your material
A practical guide to choosing and planning limestone flex base - standard. Match the exact grade to your project; nominal sizes and natural colors can vary between yards.
Size & grading
Fines to nominal 1 1/2 in; confirm upper sieve
Surface character
Angular, compactable surface
Estimated loose coverage
About 70 sq ft / ton at 3 in
Before compaction, settling or waste.
Applications to discuss with your installer: Driveways, road subbase, pads, compacted surfaces. Confirm source specifications and project approval before use.
Base with fines is not clean drainage stone. Do not use it as a free-draining trench or decorative finish without checking the design.
Remove organic matter and soft spots, establish drainage and prepare a firm subgrade. Ask your contractor whether separation fabric is needed.
Place in controlled lifts and compact at suitable moisture. Lift thickness, compaction effort and finished depth depend on the material and project specification.
Keep drainage paths open. Regrade ruts and replenish worn areas; address subgrade or drainage problems before adding another layer.
Manufacturer webpage may label upper sieve 1 3/4 in; use written SKU specification. Exact size and fines content, source test reports where specified, compacted depth and equipment access.
General planning guidance. Supplier specifications, project plans and site conditions determine suitability and installation requirements.
3 t · Limestone Flex Base - Standard
$78.00
Live catalog prices, before delivery and tax. Delivery starts at $95 for a small truck (up to 10 tons) within 5 miles of the yard and $119 for a big truck (up to 20 tons), adding $20 per 5-mile band through 40 miles only. Beyond 40 miles, request an address-specific delivery quote. We choose the cheapest confirmed truck setup that fits your order.
Estimated price per loose cubic yard = price per ton × this grade's tons per cubic yard. Sold by the ton, not guaranteed by volume. Moisture and compaction change density.
Estimates at 1.55 tons per cubic yard, rounded up and never below the minimum. Material only. Depths are loose-volume planning examples, not a compacted thickness guarantee. Confirm the design depth and source-specific compaction allowance before ordering.
Material, freight and applicable sales tax are separate. Enter your ZIP to check coverage; an unavailable freight rate requires an address-specific quote, not an assumed charge. Ask dispatch whether scale-ticket documentation is available for your loads.
Austin, Round Rock, Pflugerville, Cedar Park, Leander, Georgetown, Buda, Kyle, Manor, Dripping Springs, San Marcos, New Braunfels, Bastrop and 28 more Central Texas towns. Enter your ZIP at checkout to confirm delivery and the charge.
Yes, in everyday use. Flex base is the common Texas name for dense-graded crushed limestone with fines. TxDOT-specified grades must be confirmed before ordering.
Use this grade's current catalog density shown above for a loose-volume estimate. Compacted depth needs a source-specific allowance, not an assumed loose-to-compacted conversion.
Before the next load

Winter drainage
Start with runoff and unstable ground, then choose the right base. A fresh load of gravel alone may hide rather than solve winter driveway ruts.
Read guide
Commercial specifications
Specify the contract edition, type, grade and required test reports before purchasing flexible base for a Texas public works project.
Read guide
Spring preparation
Plan a DG patio around the subgrade, containment and water flow. Distinguish unstabilized granite from an approved stabilized surface.
Read guide