AI material illustration$30.00 / ton
Washed and screened cushion sand with no rock or sharp pieces, used to bed and shade water lines, sewer, electrical conduit and irrigation. It packs firmly around pipe without scarring it and meets typical utility trench bedding requirements.
3 tons × $30.00 per ton. Delivery and applicable tax are separate.
1 dump-truck load
Up to 16 tons per load. Different materials ship in separate loads.
Typical nominal specifications. Natural materials vary by source, moisture, and production run; confirm critical engineering requirements before ordering.
AI material illustrationEnter your area and depth and we'll estimate the tonnage.
Estimate includes no waste factor. Density changes with moisture and compaction; ordering 5–10% extra is common for field variation.
Keep the dump area clear of people, vehicles, soft ground, septic systems, and overhead utilities. The driver makes the final safe-placement decision on arrival.
Know your material
A practical guide to choosing and planning utility bedding & cushion sand. Match the exact grade to your project; nominal sizes and natural colors can vary between yards.
Size & grading
Fine to medium, all passing ⅜ in
Surface character
Soft, uniform, non-abrasive bedding
Estimated loose coverage
About 86 sq ft / ton at 3 in
Before compaction, settling or waste.
Bedding, masonry or concrete work only when the selected sand's grading is appropriate to the specific application.
Fine masonry sand, utility sand and washed concrete sand are different products. Do not assume suitability for play areas, pools, septic systems or engineered mixes.
Set finished elevations and contain the installation area. Confirm the required base and bedding system with your installer.
Screed or mix according to the project specification. Moisture changes handling and bulk volume; use source grading data for engineered work.
Keep stored sand covered and separated from soil or debris. Replenish exposed bedding only after correcting washout and drainage issues.
Washed versus unwashed, particle-size distribution, application approval and any required testing.
General planning guidance. Supplier specifications, project plans and site conditions determine suitability and installation requirements.
3 t · Utility Bedding & Cushion Sand
$90.00